Fluorescent pigment

We can supply many kinds of Fluorescent Pigment products, welcome to contact with us.

Thermoplastic Fluorescent Pigments

UNS SERIES

RECOMMENDED APPLICATOINS:

For a wide range of applications where resistance to strong solvents is not needed. Perform well in a system based on aliphatic and some aromatic hydrocarbons. Also usable in water systems where prolonged shelf life is not required. Recommended for such applications as paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, vinyl plastisols, plastics, modeling clay, and crayons.

HIGHLIGHT OF PROPERTIES:

Thermoplastic, tinting strength, and broad compatibility.

SHADES:

Chartreuse, Green, Orange-Yellow, Orange, Orange-Red, Red, Cerise, Pink, Magenta, Blue, Purple

CHEMICAL NATURE:

A solid solution of fluorescent dyes in an amino resin

PHYSICAL PROPERTIES:

Shape and state:

Solid irregular shaped particles

Oil Absorption:

50-60g/100g

Moisture:

< 2% (2 gram under 140C for 0.5 hours)

Specific Gravity:

1.3 (20℃)

Solvent Resistance:

Solvent	Acetone	Methanol Ethanol	Ethyl Acetate	Mineral Spirits	Methyl Ethyl Ketone	Pentane Toluene Xylene
Bleed	2	3	2	5	2	4

Solubility scales: 1- Entirely Soluble; 2- Soluble; 3-Slight 4-Negligible; 5-None; NOTE: The above information is offered as a reference only.

*Particle Size* (Microscope):

Maximum 10 um; Average <5 um

Softening Point:

80~110℃

Decomposition Point:

> 300℃

Maximum Processing Temperature:

90℃

*COLOR ASSESSMENT*:

Shade (hue) and strength are compared against an approved standard by trained technicians upon preparing side-by-side drawdowns or plastic chips and placed in standard light box containing UV and D65.

STORAGE:

Under conditions that are cool, dry, covered, away from direct sunlight and free of airborne contaminates, UNS pigments have an indefinite shelf life.

TOXICITY:

Tests conducted through independent laboratories have found UNS-Series Fluorescent Pigments to be "essentially non-toxic." MSDS is available upon request. Good industrial hygiene and handling methods are essential in the use of all products whether or not they are determined to be hazardous.

NOTE:

Items marked with * are standard QC items taken on batch bases.