We can supply many kinds of Fluorescent Pigment products, welcome to contact with us.
Thermoplastic Fluorescent Pigments |
| UNS SERIES |
| RECOMMENDED APPLICATOINS: |
For a wide range of applications where resistance to strong solvents is not needed. Perform well in a system based on aliphatic and some aromatic hydrocarbons. Also usable in water systems where prolonged shelf life is not required. Recommended for such applications as paper coatings, vinyl coated fabric, A-type gravure inks, paints, screen inks, vinyl plastisols, plastics, modeling clay, and crayons. |
| HIGHLIGHT OF PROPERTIES: |
Thermoplastic, tinting strength, and broad compatibility. |
| SHADES: |
Chartreuse, Green, Orange-Yellow, Orange, Orange-Red, Red, Cerise, Pink, Magenta, Blue, Purple |
| CHEMICAL NATURE: |
A solid solution of fluorescent dyes in an amino resin |
| PHYSICAL PROPERTIES: |
| Shape and state: |
Solid irregular shaped particles |
| Oil Absorption: |
50-60g/100g |
| Moisture: |
< 2% (2 gram under 140C for 0.5 hours) |
| Specific Gravity: |
1.3 (20℃) |
| Solvent Resistance: |
| Solvent |
Acetone |
Methanol Ethanol |
Ethyl Acetate |
Mineral Spirits |
Methyl Ethyl Ketone |
Pentane Toluene Xylene |
| Bleed |
2 |
3 |
2 |
5 |
2 |
4 |
Solubility scales: 1- Entirely Soluble; 2- Soluble; 3-Slight 4-Negligible; 5-None;
NOTE: The above information is offered as a reference only. |
| *Particle Size* (Microscope): |
Maximum 10 um; Average <5 um |
| Softening Point: |
80~110℃ |
| Decomposition Point: |
> 300℃ |
| Maximum Processing Temperature: |
90℃ |
| *COLOR ASSESSMENT*: |
Shade (hue) and strength are compared against an approved standard by trained technicians upon preparing side-by-side drawdowns or plastic chips and placed in standard light box containing UV and D65. |
| STORAGE: |
Under conditions that are cool, dry, covered, away from direct sunlight and free of airborne contaminates, UNS pigments have an indefinite shelf life. |
| TOXICITY: |
Tests conducted through independent laboratories have found UNS-Series Fluorescent Pigments to be "essentially non-toxic." MSDS is available upon request. Good industrial hygiene and handling methods are essential in the use of all products whether or not they are determined to be hazardous. |
| NOTE: |
Items marked with * are standard QC items taken on batch bases. |
